Pully’s & Timingbelts

With this selection of pully’s you can make the best combination for the telescope gear reduction that works well with our stepper motor and the Celano.

Contact us if you need assistance with calculating the best gear reduction for your telecsope and aperture.  

 

DSP-PU48

  • 48 teeth

  • Polycarbonate pulley

  • Aluminum insert, 8 mm bore

  • Belt width 9 mm, pitch 3 mm

  • Flanges on both sides

€ 18,50 

 

DSP-PU40

  • 40 teeth

  • Polycarbonate pulley

  • Aluminum insert, 8 mm bore

  • Belt width 9 mm, pitch 3 mm

  • Flange on one side

€ 16,50 

 

DSP-PU30

  • 30 teeth

  • Polycarbonate pulley

  • Aluminum insert, 8 mm bore

  • Belt width 9 mm, pitch 3 mm

  • Flange on one side

€ 16,50

For making a toothed bearing (altitude or azimuth) we offer timing belt in any length. We also offer belts of fixed lengths to adjust gear reduction or for gear coupling.

 

DSP-BLT72

For 30:40 ratio or 30:48 ratio

  • Neoprene belt with fiberglass cords

  • Belt width 9 mm

  • 3 mm pitch

  • 72 rounded teeth

€ 11,35

 

DSP-TB3 Premium timing belt

  • Neoprene belt with fiberglass cords

  • Belt width 9 mm

  • 3 mm pitch

  • Rounded teeth

€ 15,00 per meter

Contact us to order

 

UA-22041125-2